Accreditations & Registrations

EMC Bayswater’s Certificates, Scope of Accreditation & Site Registrations

EMC Bayswater ISO 17025 Performance & Approvals Testing Certificate

EMC Bayswater – ISO 17025 Performance & Approvals Testing Certificate

The National Association of Testing Authorities, Australia (NATA) is our current accreditation provider. EMC Bayswater facility complies and is accredited to ISO/IEC 17025 ensuring quality assurance. ISO 17025 is the baseline quality standard for laboratories. EMC Bayswater is also accredited to various product-specific and generic EMC standards. We are a service provider of EMC emissions & immunity product testing including radio testing. As an ISO 17025, we are required to adhere to quality assurance guidelines including, impartiality and maintain traceability, proficiency testing, internal and external audits and much more. We remain committed to ongoing scope expansion of our existing accreditation testing scope.

NATA is Australia’s internationally recognised national accreditation authority. Providing independent assurance of technical competence verified through regular audits. NATA was established in 1947. And was the world’s first comprehensive laboratory accreditation body, it still remains one of the largest. The Australian Communication and Media Authority (ACMA) accept NATA endorsed EMC test reports in cases of dispute. If you need EMC testing for Australia NATA reports are the best option.

EMC Bayswater Pty Ltd current scope of NATA Accredited EMC Testing

EMC Bayswater Pty Ltd current scope of NATA Accredited EMC Testing

Using an accredited testing facility is the safest way of proving compliance. NATA reports are accepted by the ACMA and most overseas regulators for demonstrating compliance. NATA is a founding member of the International Laboratory Accreditation Cooperation (ILAC). Which promotes the acceptance of test and calibration data around the world. ILAC and NATA have established mutual recognition agreements (MRA). With MRAs for many different accreditation agencies in varying countries. Our NATA endorsed reports are acceptable in all European countries. And most other countries around the world. NATA MRA partners include the following countries.

USA, Japan, Taiwan, China, Singapore, Korea and all European Union (EU) and European Free Trade Association (EFTA) countries.

NATA is synonymous with testing excellence. Our NATA accreditation status and scope are online, at the NATA website.

EMC Bayswater Pty Ltd FCC Accredited EMC Testing

Federal communications commission – FCC Compliance for North America and associated regions

Accredited Federal Communications Commission (FCC) test facility. EMC Bayswater Pty Ltd is an accredited Federal Communications Commission (FCC) test facility. Recognised by NATA and the FCC under the mutual recognition agreement. The MRA is through the Australian Communications and Media Authority (ACMA) and the FCC. FCC testing requires radiated emissions testing on a compliant test site as per ANSI C63.4: 2014. These test site requirements are similar to the previous FCC requirements as per the old FCC (2.948) registered test site database. Some testing requires the laboratory to be an accredited laboratory. Such as certification testing including transmitter testing (intentional radiators).

We are fully accredited to perform FCC Part 15B (non-intentional radiators) and FCC Part 15C (intentional radiators) over the frequency range of 9kHz to 40GHz using methods of ANSI C63.4: 2014 & ANSI C63.10: 2013. Including testing subject to Self Declaration of Conformity (sDOC) and certification under the rules of CFR 47, Part 15 of the Commission’s Rules.

EMC Bayswater Pty Ltd letter to confirm Industry Canada registered test site

Innovation, Science and Economic Development (ISED) previously Industry Canada (IC)

Compliance for Canada can be achieved through meeting the legislated requirements. As set out by the Innovation, Science and Economic Development (ISED), previously known as Industry Canada (IC). EMC Bayswater has an Industry Canada IC registered test site. Please see the PDF document for further details by clicking on the image to the left. The Bureau (Industry Canada), now known as Innovation, Science and Economic Development (ISED)), found that the submitted test site validation and measurement facility, for our 3m alternative test site was satisfactory. As such we can perform Radiated and Conducted compliance measurements for Canada. We are accredited for unintentional radiators (non-transmitter) using ICES 001, CAN/CSA-CEI/IEC CISPR 11, ICES 003 and CAN/CSA-CEI/IEC CISPR 22. We are also accredited for RSS 210 and RSS GEN over the frequency range of 9kHz to 40GHz using methods of ANSI C63.4: 2014 & ANSI C63.10: 2013.

EMC Bayswater Pty Ltd current scope of NATA Accredited EMC Testing

EMC Bayswater facility and quality management systems and processes comply with ISO/IEC 17025

Please note: Non dated standard references refer to the latest current published standard

EMC testing Product standards

AS/NZS CISPR 11, CISPR 11, EN 55011, ICES 001 and CAN/CSA-CEI/IEC CISPR 11 (excluding measurements below 9kHz) – Industrial, Scientific and Medical equipment

AS/NZS CISPR 12, CISPR 12 and EN 55012 (excluding insertion loss of ignition) – Vehicles, boats and internal combustion engines

AS/NZS CISPR 13, CISPR 13 and EN 55013 – Electromagnetic Compatibility-Requirements for Sound and television broadcast receivers and associated equipment

AS/NZS CISPR 14-1, CISPR 14-1 and EN 55014-1 – Requirements for household appliances, electrical tools and similar apparatus – Emission

AS/NZS CISPR 14-2, CISPR 14-2 and EN 55014-2 – Requirements for household appliances, electric tools and similar apparatus – Part 2: Immunity

AS/NZS CISPR 15, CISPR 15 and EN 55015 – Electrical lighting and similar equipment

AS/NZS CISPR 22, CISPR 22, EN 55022, ICES-003 and CAN/CSA-CEI/IEC CISPR 22 – Information technology equipment- Radio disturbance characteristics

AS/NZS CISPR 24, CISPR 24 and EN 55024 – Information technology equipment – Immunity characteristics – Limits and methods of measurement

AS/NZS CISPR 25, CISPR 25 and EN 55025 – Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices – Limits and methods of measurement

AS/NZS CISPR 32, CISPR 32 and EN 55032 – Electromagnetic compatibility of multimedia equipment – Emission requirements

AS/NZS CISPR 61000.3.2 and EN 61000-3-2  – Limits for harmonic current emissions (equipment input current less than 16 A per phase)

AS/NZS CISPR 61000.3.3 and EN 61000-3-3 – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current less than 16 A per phase and not subject to conditional connection.

AS/NZS GMNS Clauses 2.3.52 to 2.3.59 – Australian / New Zealand Gaming Machine National Standard

EN 61547 – Specification for equipment for general lighting purposes. EMC immunity requirements

EN 61326-1 and IEC 61326-1- Electrical equipment for measurement, control and laboratory use – EMC requirements

EN 50270 – Electromagnetic Compatibility – Electrical Apparatus For The Detection And Measurement Of Combustible Gases, Toxic Gases Or Oxygen

EN 50293 – Road traffic signal systems – Electromagnetic compatibility

EN 50556 Clause 6.7 – Road traffic signal systems

EN 50130-4 – Alarm systems. Electromagnetic compatibility. Product family standard: Immunity requirements for components of fire, intruder and social alarm systems (excluding testing using alternative EN 61000-4-20 methodology)

IEC 60225-22-6 Electrical Disturbance Tests for measurements relays and protection equipment. Immunity to conducted disturbances induced by radio-frequency fields

EN 55103-1 (Excluding testing of harmonics and flicker with products >16 Amps mains supply)

EN 50370-2 – Electromagnetic compatibility for machine tools – Part 2 – Immunity

EN 50491-5-2 – General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS). EMC requirements for HBES/BACS used in a residential, commercial and light industry environment

EN 50491-5-2 – General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS). EMC requirements for HBES/BACS used in a residential, commercial and light industry environment

IEC 60335.1 – Sections: 19.11.4.1, 19.11.4.2, 19.11.4.3,  19.11.4.4, 19.11.4.5 and 19.11.4.6 – Household and similar electrical appliances – Safety

FCC Part 15, Subpart B for unintentional emitters in the frequency range 9kHz to 40GHz using ANSI 63-4: 2014

ANSI C63.4: 2014 – Methods of Measurement of Radio-Noise Emissions from Low Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz.

Generic EMC testing standards

AS/NZS 61000.6.1 and EN 61000-6-1 – Immunity for residential, commercial and light-industrial environments

AS/NZS 61000.6.2 and EN 61000-6-2 – Immunity for industrial environments

AS/NZS CISPR 61000.6.3, IEC 61000-6-3 and EN 61000-6-3 – Emission standard for residential, commercial and light-industrial environments

AS/NZS CISPR 61000.6.4, IEC 61000-6-4 and EN 61000-6-4 – Emission standard for industrial environments

AS/NZS 4251.1 – Electromagnetic compatibility (EMC) – Generic emission Standard Residential, commercial and light industry

AS/NZS 4251.2 – Electromagnetic compatibility (EMC) – Industrial Environments

Railway EMC testing

EN 50121-3-2 – Railway applications. Electromagnetic compatibility. Emission and immunity of rolling stock.

EN 50121-4 – Railway applications. Electromagnetic compatibility. Emission and immunity of the signalling and telecommunications apparatus.

EN 50155 Clause 5.4 and 5.5 (referencing clause 12.2.7 and 12.2.8) – Railway applications – Electronic equipment used on rolling stock

Medical EMC testing

IEC 60601-1-2 and EN 60601-1-2 – Medical electrical equipment – Part 1-2: General requirements for safety – Collateral standard: Electromagnetic compatibility – Requirements and tests

IEC 61326-2-6 and EN 61326-2-6 – Electrical equipment for measurement, control and laboratory use – EMC requirements – In vitro diagnostic (IVD) medical equipment

Military EMC testing

MIL-STD 461D, E and F methods CE101, CE102, RE101, RE102, CS101, CS106, CS109, CS114, RS101 and RS103 – Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems And Equipment

Wireless Radio EMC testing

AS/NZS 4268 in the frequency range of 9kHz to 26.5GHz – Radio equipment and systems – Short range devices – Limits and methods of measurement

ETSI EN 301 489-1 – Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services

FCC part 15, Subpart C for intentional emitters in the frequency range 9kHz to 40GHz using ANSI C63.4-2014 and ANSI C63.10-2013

FCC KDB Guidelines : KDB789033 D02, KDB558074 D01, and KDB905462 ;

RSS-210 – Licence-Exempt Radio Apparatus: Category I Equipment for intentional emitters in the frequency range 9kHz to 40GHz using ANSI C63.4-2014 and ANSI C63.10-2013

RSS GEN – RSS-Gen — General Requirements for Compliance of Radio Apparatus for intentional emitters in the frequency range 9kHz to 40GHz using ANSI C63.4-2014 and ANSI C63.10-2013

 

Basic referenced EMC standards for testing

EN 61000-4-2, IEC 61000-4-2 and AS/NZS 61000-4-2 – Electrostatic discharge immunity test

EN 61000-4-3, IEC 61000-4-3 and AS/NZS 61000-4-3 (80MHz to 6.0GHz) – Radiated radio-frequency electromagnetic field immunity test

EN 61000-4-4, IEC 61000-4-4 and AS/NZS 61000-4-4 – Electrical fast transient/burst immunity test

EN 61000-4-5, IEC 61000-4-5 and AS/NZS 61000-4-5 – Surge immunity test

EN 61000-4-6, IEC 61000-4-6 and AS/NZS 61000-4-6 – Immunity to conducted disturbances induced by radio-frequency fields

EN 61000-4-8, IEC 61000-4-8 and AS/NZS 61000-4-8 – Power frequency magnetic field immunity test

EN 61000-4-9, IEC 61000-4-9 and AS/NZS 61000-4-9 – Pulse magnetic field immunity test

EN 61000-4-11, IEC 61000-4-11 and AS/NZS 61000-4-11 – Voltage dips, short interruptions and voltage variations immunity tests

RF shielding effectiveness

MIL-STD 285 – Attenuation Measurements for Enclosures Electromagnetic Shielding

IEEE Std 299 – Method of Measuring the Effectiveness of the Electromagnetic Shielding Enclosures

Share This
GET QUOTE