Measurement, control and laboratory use equipment
EMC compliance for the RCM, CE, FCC and IC
Commonly used standards for EMC Testing Measurement Control and laboratory use. Please contact us for further information and clarification.
Products include: medical equipment, in vitro, blood analyser, forensic machine, laboratory equipment, measuring equipment, voltmeter, RF meter, spectrum analyser, EMI receiver, power meter, field probe, ECG, hospital equipment, ultra-sound, particle analyser, and many more all fit into the EMC Testing Measurement Control and laboratory use category.
Note: In addition to the EMC Testing Measurement Control and laboratory use any product with a radio transmitter/receiver will also require additional wireless/radio performance testing for information on radio testing click here.
RCM – Australia & New Zealand EMC compliance
Emissions testing (not all the listed standards may be required or listed)
EN 61326-1 – Electrical equipment for measurement, control and laboratory use
Immunity testing
None
CE – Europe EMC compliance
Emissions testing (not all the listed standards may be required or listed)
EN 61326-1 – Electrical equipment for measurement, control and laboratory use
EN 61326-2-6 – Electrical equipment for measurement, control and laboratory use – Particular requirements – In vitro diagnostic (IVD) medical equipment
EN 61000.3.2 – Electromagnetic compatibility (EMC) – Limits for harmonic current emissions (AC mains only, Equipment input current less than or equal to 16 A per phase)
EN 61000.3.3 – Electromagnetic compatibility (EMC) – Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems (AC mains only, Equipment input current less than or equal to 16 A per phase)
EN 61000-3-11 Electromagnetic compatibility (EMC) – Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems – Equipment with rated current <= 75A and subject to conditional connection
EN 61000-3-12 Electromagnetic compatibility (EMC) – Limits – Limitation for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16A and <= 75A per phase.
Immunity testing (not all the listed standards may be required or listed)
EN 61326-1 – Electrical equipment for measurement, control and laboratory use
EN 61326-2-6 – Electrical equipment for measurement, control and laboratory use – Particular requirements – In vitro diagnostic (IVD) medical equipment
FCC – North America EMC compliance
Emissions testing
CFR Title 47, SubChapter A, FCC Part 15, Subpart B – Unintentional radiators
CFR Title 47, SubChapter A, FCC Part 18
Immunity testing
None
ISED (previously IC) – Canada EMC compliance
Emissions testing
Typically a valid FCC test report with the relevant cross-references are deemed to be sufficient
Immunity testing
None